0
home

Round Bars

home
Showing 24 Items
ViewView
  1. SMO 254 Round Bars

    SMO 254 Round Bar is austenitic stainless steel with a high molybdenum content. Coupled with Nickel and Copper this gives the alloy a good resistance to pitting and crevice corrosion, especially in environments containing halide ions, e.g. chloride, bromide and fluoride solutions. Our SMO 254 Round Bars is a high-alloy austenitic stainless steel developed for use in seawater and other aggressive chloride-bearing media.Features:Excellent resistance to pitting and crevice corrosion High resistance to general corrosion High resistance to stress corrosion cracking Higher strength than conventional austenitic stainless steels Good weldability
    Send Inquiry
  2. Titanium Gr 5 Round Bars

    Grade 5 also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4is the most commonly used alloy. It has a chemical composition of 6% aluminum, 4% vanadium, 0.25% (maximum) iron, 0.2% (maximum) oxygen, and the remainder titanium.[8]It is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties (excluding thermal conductivity, which is about 60% lower in Grade 5 Ti than in CP Ti).[9] Among its many advantages, it is heat treatable. This grade is an excellent combination of strength, corrosion resistance, weld and fabricability."This alpha-beta alloy is the workhorse alloy of the titanium industry. The alloy is fully heat treatable in section sizes up to 15 mm and is used up to approximately 400 C (750 F). Since it is the most commonly used alloy over 70% of all alloy grades melted are a sub-grade of Ti6Al4V, its uses span many aerospace airframe and engine component uses and also major non-aerospace applications in the marine, offshore and power generation industries in particular.
    Send Inquiry
  3. Duplex 2507 Round Bars

    Super Duplex 2507 Round Bars - UNS S32750 - DIN 1.4410 Steelofabrica has been among the prominent stock holders of Duplex 2205 / 2750 / 2760 Round bars. We have been supplying our client all over India with these raw materials for their end consumption.We provide clients with Imported make raw materials in Round bars.Duplex 2507 is a super duplex stainless steel designed for applications which demand exceptional strength and corrosion resistance. Alloy 2507 has 25% chromium, 4% molybdenum, and 7% nickel. This high molybdenum, chromium and nitrogen content results in excellent resistance to chloride pitting and crevice corrosion attack and the duplex structure provides 2507 with exceptional resistance to chloride stress corrosion cracking.Usage of Duplex 2507 should be limited to applications below 600 Degree F (316 Degree C). Extended elevated temperature exposure can reduce both the toughness and corrosion resistance of alloy 2507.
    Send Inquiry
  4. Inconel 718 Round Bars

    Inconel 718 is a nickel-chromium-molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion. This nickel steel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. This nickel alloy is used from cryogenic temperatures up to long term service at 1200 F. One of the distinguishing features of Inconel 718s composition is the addition of niobium to permit age hardening which allows annealing and welding without spontaneous hardening during heating and cooling. The addition of niobium acts with the molybdenum to stiffen the alloys matrix and provide high strength without a strengthening heat treatment. Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium. This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition. This superalloy is used in a variety of industries such as aerospace, chemical processing, marine engineering, pollution-control equipment, and nuclear reactors.
    Send Inquiry
  5. Inconel X-750 Round Bars

    By understanding the varied needs of our valued patrons, we are broadly involved in presenting a quality approved spectrum of Inconel X 750 Round Bar Fitting in the market. The offered products are designed from high-quality.Features: Long service life Immaculate finish Simple design High efficiency Enhanced durability Crack resistance
    Send Inquiry
  6. Inconel 600 Round Bars

    Product details:Usage Construction Single Piece Length 36 meter Material Stainless Steel Minimum Order Quantity 10Kilogram Product description:We are offering Inconel 600 Round Bars About us we pragati metal corporation are the foremost trader, importer, wholesaler, retailer and exporter of Stainless Steel Pipe, Stainless Steel Tube, Stainless Steel Flange, etc. Our products are high in demand due to their premium quality, seamless finish, different patterns and affordable prices. Furthermore, we ensure to timely deliver these products to our clients, through this we have gained a huge clients base in the market.
    Send Inquiry
Contact Us

15-A/65-73, Habib Building, 2'nd Panjrapole Lane, C.P.Tank Road, Mumbai, Maharashtra, 400004, India
Phone :+918045802406